privatewelldata / Counties / Minnesota

Yellow Medicine County, Minnesota

Arsenic: 3 of 18 sampled wells (17%) above the EPA limit of 10 µg/L. Nitrate: 4 of 70 sampled wells (6%) above the EPA limit of 10 mg/L as N. Samples 1964-06-25 to 2011-09-29; updated 2026-10-18. Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well.

What wells in this county have measured for arsenic and nitrate. A local picture only: test your own well to know your water.

Arsenic

3 of 18 sampled wells (17%) had a latest result above the EPA limit of 10 µg/L.

Median (latest per well)
0.4 µg/L
90th percentile
13.98 µg/L
Highest
38.1 µg/L
Non-detects
9 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
Samples
18, 1995-06-07 to 2011-09-29
Source
Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18

Nitrate

4 of 70 sampled wells (6%) had a latest result above the EPA limit of 10 mg/L as N.

Median (latest per well)
0.035 mg/L as N
90th percentile
3.2 mg/L as N
Highest
44.05 mg/L as N
Non-detects
16 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
Samples
73, 1964-06-25 to 2011-09-29
Source
Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18

Includes monitoring, research and private wells reported to the Water Quality Portal. Non-detects count only when the lab's detection limit is at or below the EPA limit. Method: data rules.

What to do next

  1. Test your own well. County numbers cannot tell you what is in your water. See which tests fit your well.
  2. Use a lab certified by Minnesota. Certified labs in Minnesota.
  3. Compare your results with the EPA limits (arsenic 10 µg/L, nitrate 10 mg/L as N). If a result is above a limit, contact your county or state health department.
  4. If a result is high: arsenic guide · nitrate guide · bacteria guide · salesperson checklist.
  5. Test again every year for bacteria and nitrate. Get a yearly reminder.