privatewelldata / Counties / Minnesota

Scott County, Minnesota

Arsenic: 7 of 28 sampled wells (25%) above the EPA limit of 10 µg/L. Nitrate: 1 of 59 sampled wells (2%) above the EPA limit of 10 mg/L as N. Samples 1960-08-05 to 2025-05-14; updated 2026-10-18. Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well.

What wells in this county have measured for arsenic and nitrate. A local picture only: test your own well to know your water.

Arsenic

7 of 28 sampled wells (25%) had a latest result above the EPA limit of 10 µg/L.

Median (latest per well)
1.12 µg/L
90th percentile
21.6 µg/L
Highest
30.7 µg/L
Non-detects
10 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
Samples
44, 1980-09-03 to 2025-05-14
Source
Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18

Nitrate

1 of 59 sampled wells (2%) had a latest result above the EPA limit of 10 mg/L as N.

Median (latest per well)
0.07 mg/L as N
90th percentile
5.33 mg/L as N
Highest
11.295 mg/L as N
Non-detects
18 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
Samples
77, 1960-08-05 to 2018-08-15
Source
Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18

Includes monitoring, research and private wells reported to the Water Quality Portal. Non-detects count only when the lab's detection limit is at or below the EPA limit. Method: data rules.

What to do next

  1. Test your own well. County numbers cannot tell you what is in your water. See which tests fit your well.
  2. Use a lab certified by Minnesota. Certified labs in Minnesota.
  3. Compare your results with the EPA limits (arsenic 10 µg/L, nitrate 10 mg/L as N). If a result is above a limit, contact your county or state health department.
  4. If a result is high: arsenic guide · nitrate guide · bacteria guide · salesperson checklist.
  5. Test again every year for bacteria and nitrate. Get a yearly reminder.