privatewelldata / Counties / Minnesota
Rock County, Minnesota
Arsenic: 4 of 53 sampled wells (8%) above the EPA limit of 10 µg/L. Nitrate: 7 of 41 sampled wells (17%) above the EPA limit of 10 mg/L as N. Samples 1958-11-25 to 2021-06-04; updated 2026-10-18. Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well.
What wells in this county have measured for arsenic and nitrate. A local picture only: test your own well to know your water.
Arsenic
4 of 53 sampled wells (8%) had a latest result above the EPA limit of 10 µg/L.
- Median (latest per well)
- 0.795 µg/L
- 90th percentile
- 7.6 µg/L
- Highest
- 25.5 µg/L
- Non-detects
- 6 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
- Samples
- 53, 1993-06-08 to 2021-06-04
- Source
- Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18
Nitrate
7 of 41 sampled wells (17%) had a latest result above the EPA limit of 10 mg/L as N.
- Median (latest per well)
- 0.63 mg/L as N
- 90th percentile
- 14 mg/L as N
- Highest
- 45 mg/L as N
- Non-detects
- 2 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
- Samples
- 80, 1958-11-25 to 1997-08-28
- Source
- Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18
Includes monitoring, research and private wells reported to the Water Quality Portal. Non-detects count only when the lab's detection limit is at or below the EPA limit. Method: data rules.
What to do next
- Test your own well. County numbers cannot tell you what is in your water. See which tests fit your well.
- Use a lab certified by Minnesota. Certified labs in Minnesota.
- Compare your results with the EPA limits (arsenic 10 µg/L, nitrate 10 mg/L as N). If a result is above a limit, contact your county or state health department.
- If a result is high: arsenic guide · nitrate guide · bacteria guide · salesperson checklist.
- Test again every year for bacteria and nitrate. Get a yearly reminder.