Grant County, Minnesota

Arsenic: 13 of 14 sampled wells (93%) above the EPA limit of 10 µg/L. Nitrate: 1 of 30 sampled wells (3%) above the EPA limit of 10 mg/L as N. Samples 1964-01-01 to 2007-04-24; updated 2026-10-18. Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well.

What wells in this county have measured for arsenic and nitrate. A local picture only: test your own well to know your water.

Arsenic

13 of 14 sampled wells (93%) had a latest result above the EPA limit of 10 µg/L.

Median (latest per well): 26.8 µg/L
90th percentile: 41.3 µg/L
Highest: 83.7 µg/L
Samples: 14, 1993-05-13 to 2006-09-18
Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18

Nitrate

1 of 30 sampled wells (3%) had a latest result above the EPA limit of 10 mg/L as N.

Median (latest per well): 0.005 mg/L as N
90th percentile: 1.017 mg/L as N
Highest: 14 mg/L as N
Non-detects: 10 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
Samples: 34, 1964-01-01 to 2007-04-24
Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18

Includes monitoring, research and private wells reported to the Water Quality Portal. Non-detects count only when the lab's detection limit is at or below the EPA limit. Method: data rules.

What to do next

Test your own well. County numbers cannot tell you what is in your water. See which tests fit your well.
Use a lab certified by Minnesota. Certified labs in Minnesota.
Compare your results with the EPA limits (arsenic 10 µg/L, nitrate 10 mg/L as N). If a result is above a limit, contact your county or state health department.
If a result is high: arsenic guide · nitrate guide · bacteria guide · salesperson checklist.
Test again every year for bacteria and nitrate. Get a yearly reminder.