privatewelldata / Counties / Minnesota

Douglas County, Minnesota

Arsenic: 17 of 45 sampled wells (38%) above the EPA limit of 10 µg/L. Nitrate: 8 of 80 sampled wells (10%) above the EPA limit of 10 mg/L as N. Samples 1964-06-22 to 2007-07-18; updated 2026-10-18. Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well.

What wells in this county have measured for arsenic and nitrate. A local picture only: test your own well to know your water.

Arsenic

17 of 45 sampled wells (38%) had a latest result above the EPA limit of 10 µg/L.

Median (latest per well)
4.7 µg/L
90th percentile
23.1 µg/L
Highest
63.5 µg/L
Samples
45, 1985-05-28 to 2006-09-18
Source
Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18

Nitrate

8 of 80 sampled wells (10%) had a latest result above the EPA limit of 10 mg/L as N.

Median (latest per well)
0.006 mg/L as N
90th percentile
10 mg/L as N
Highest
41 mg/L as N
Non-detects
15 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
Samples
131, 1964-06-22 to 2007-07-18
Source
Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18

Includes monitoring, research and private wells reported to the Water Quality Portal. Non-detects count only when the lab's detection limit is at or below the EPA limit. Method: data rules.

What to do next

  1. Test your own well. County numbers cannot tell you what is in your water. See which tests fit your well.
  2. Use a lab certified by Minnesota. Certified labs in Minnesota.
  3. Compare your results with the EPA limits (arsenic 10 µg/L, nitrate 10 mg/L as N). If a result is above a limit, contact your county or state health department.
  4. If a result is high: arsenic guide · nitrate guide · bacteria guide · salesperson checklist.
  5. Test again every year for bacteria and nitrate. Get a yearly reminder.