privatewelldata / Counties / California

Tulare County, California

Arsenic: 34 of 182 sampled wells (19%) above the EPA limit of 10 µg/L. Nitrate: 68 of 353 sampled wells (19%) above the EPA limit of 10 mg/L as N. Samples 1949-03-24 to 2023-07-25; updated 2026-10-17. Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well.

What wells in this county have measured for arsenic and nitrate. A local picture only: test your own well to know your water.

Arsenic

34 of 182 sampled wells (19%) had a latest result above the EPA limit of 10 µg/L.

Median (latest per well)
2.3 µg/L
90th percentile
46 µg/L
Highest
230 µg/L
Non-detects
9 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
Samples
267, 1986-08-05 to 2023-07-18
Source
Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-17

Nitrate

68 of 353 sampled wells (19%) had a latest result above the EPA limit of 10 mg/L as N.

Median (latest per well)
2.1 mg/L as N
90th percentile
15 mg/L as N
Highest
88 mg/L as N
Non-detects
21 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
Samples
469, 1949-03-24 to 2023-07-25
Source
Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-17

Includes monitoring, research and private wells reported to the Water Quality Portal. Non-detects count only when the lab's detection limit is at or below the EPA limit. Method: data rules.

What to do next

  1. Test your own well. County numbers cannot tell you what is in your water. See which tests fit your well.
  2. Use a lab certified by California. Certified labs in California.
  3. Compare your results with the EPA limits (arsenic 10 µg/L, nitrate 10 mg/L as N). If a result is above a limit, contact your county or state health department.
  4. If a result is high: arsenic guide · nitrate guide · bacteria guide · salesperson checklist.
  5. Test again every year for bacteria and nitrate. Get a yearly reminder.