privatewelldata / Counties / Wisconsin
Winnebago County, Wisconsin
Nitrate: 1 of 12 sampled wells (8%) above the EPA limit of 10 mg/L as N. Samples 1965-04-16 to 2015-08-13; updated 2026-10-17. Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well.
What wells in this county have measured for arsenic and nitrate. A local picture only: test your own well to know your water.
Nitrate
1 of 12 sampled wells (8%) had a latest result above the EPA limit of 10 mg/L as N.
- Median (latest per well)
- 0.016 mg/L as N
- 90th percentile
- 8.57 mg/L as N
- Highest
- 16 mg/L as N
- Non-detects
- 3 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
- Samples
- 35, 1965-04-16 to 2015-08-13
- Source
- Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-17
Includes monitoring, research and private wells reported to the Water Quality Portal. Non-detects count only when the lab's detection limit is at or below the EPA limit. Method: data rules.
What to do next
- Test your own well. County numbers cannot tell you what is in your water. See which tests fit your well.
- Use a lab certified by Wisconsin. Certified labs in Wisconsin.
- Compare your results with the EPA limits (arsenic 10 µg/L, nitrate 10 mg/L as N). If a result is above a limit, contact your county or state health department.
- If a result is high: arsenic guide · nitrate guide · bacteria guide · salesperson checklist.
- Test again every year for bacteria and nitrate. Get a yearly reminder.