privatewelldata / Counties / Wisconsin
Dodge County, Wisconsin
Arsenic: 0 of 10 sampled wells (0%) above the EPA limit of 10 µg/L. Nitrate: 2 of 108 sampled wells (2%) above the EPA limit of 10 mg/L as N. Samples 1961-07-26 to 2014-07-14; updated 2026-10-17. Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well.
What wells in this county have measured for arsenic and nitrate. A local picture only: test your own well to know your water.
Arsenic
0 of 10 sampled wells (0%) had a latest result above the EPA limit of 10 µg/L.
- Median (latest per well)
- 0 µg/L
- 90th percentile
- 4 µg/L
- Highest
- 4 µg/L
- Non-detects
- 4 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
- Samples
- 10, 1976-05-26 to 2014-07-14
- Source
- Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-17
Nitrate
2 of 108 sampled wells (2%) had a latest result above the EPA limit of 10 mg/L as N.
- Median (latest per well)
- 0.055 mg/L as N
- 90th percentile
- 3.4 mg/L as N
- Highest
- 16.039 mg/L as N
- Non-detects
- 18 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
- Samples
- 143, 1961-07-26 to 1991-07-25
- Source
- Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-17
Includes monitoring, research and private wells reported to the Water Quality Portal. Non-detects count only when the lab's detection limit is at or below the EPA limit. Method: data rules.
What to do next
- Test your own well. County numbers cannot tell you what is in your water. See which tests fit your well.
- Use a lab certified by Wisconsin. Certified labs in Wisconsin.
- Compare your results with the EPA limits (arsenic 10 µg/L, nitrate 10 mg/L as N). If a result is above a limit, contact your county or state health department.
- If a result is high: arsenic guide · nitrate guide · bacteria guide · salesperson checklist.
- Test again every year for bacteria and nitrate. Get a yearly reminder.