privatewelldata / Counties / Pennsylvania

Pike County, Pennsylvania

Arsenic: 1 of 111 sampled wells (1%) above the EPA limit of 10 µg/L. Nitrate: 0 of 149 sampled wells (0%) above the EPA limit of 10 mg/L as N. Samples 1930-09-20 to 2023-10-25; updated 2026-10-18. Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well.

What wells in this county have measured for arsenic and nitrate. A local picture only: test your own well to know your water.

Arsenic

1 of 111 sampled wells (1%) had a latest result above the EPA limit of 10 µg/L.

Median (latest per well)
0.36 µg/L
90th percentile
3 µg/L
Highest
32 µg/L
Non-detects
26 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
Samples
203, 1972-10-05 to 2023-10-25
Source
Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18

Nitrate

0 of 149 sampled wells (0%) had a latest result above the EPA limit of 10 mg/L as N.

Median (latest per well)
0.09 mg/L as N
90th percentile
1.3 mg/L as N
Highest
6.9 mg/L as N
Non-detects
62 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
Samples
237, 1930-09-20 to 2023-10-25
Source
Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18

Includes monitoring, research and private wells reported to the Water Quality Portal. Non-detects count only when the lab's detection limit is at or below the EPA limit. Method: data rules.

What to do next

  1. Test your own well. County numbers cannot tell you what is in your water. See which tests fit your well.
  2. Use a lab certified by Pennsylvania. Certified labs in Pennsylvania.
  3. Compare your results with the EPA limits (arsenic 10 µg/L, nitrate 10 mg/L as N). If a result is above a limit, contact your county or state health department.
  4. If a result is high: arsenic guide · nitrate guide · bacteria guide · salesperson checklist.
  5. Test again every year for bacteria and nitrate. Get a yearly reminder.