privatewelldata / Counties / Pennsylvania

Philadelphia County, Pennsylvania

Arsenic: 6 of 75 sampled wells (8%) above the EPA limit of 10 µg/L. Nitrate: 22 of 195 sampled wells (11%) above the EPA limit of 10 mg/L as N. Samples 1929-07-24 to 1986-01-24; updated 2026-10-18. Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well.

What wells in this county have measured for arsenic and nitrate. A local picture only: test your own well to know your water.

Arsenic

6 of 75 sampled wells (8%) had a latest result above the EPA limit of 10 µg/L.

Median (latest per well): 0 µg/L
90th percentile: 7 µg/L
Highest: 50 µg/L
Non-detects: 54 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
Samples: 91, 1979-08-13 to 1986-01-24
Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18

Nitrate

22 of 195 sampled wells (11%) had a latest result above the EPA limit of 10 mg/L as N.

Median (latest per well): 0.8 mg/L as N
90th percentile: 12 mg/L as N
Highest: 39.1 mg/L as N
Non-detects: 7 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
Samples: 1077, 1929-07-24 to 1986-01-24
Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18

Includes monitoring, research and private wells reported to the Water Quality Portal. Non-detects count only when the lab's detection limit is at or below the EPA limit. Method: data rules.

What to do next

Test your own well. County numbers cannot tell you what is in your water. See which tests fit your well.
Use a lab certified by Pennsylvania. Certified labs in Pennsylvania.
Compare your results with the EPA limits (arsenic 10 µg/L, nitrate 10 mg/L as N). If a result is above a limit, contact your county or state health department.
If a result is high: arsenic guide · nitrate guide · bacteria guide · salesperson checklist.
Test again every year for bacteria and nitrate. Get a yearly reminder.