privatewelldata / Counties / Ohio
Preble County, Ohio
Arsenic: 17 of 39 sampled wells (44%) above the EPA limit of 10 µg/L. Nitrate: 0 of 41 sampled wells (0%) above the EPA limit of 10 mg/L as N. Samples 1991-03-26 to 2020-08-06; updated 2026-10-18. Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well.
What wells in this county have measured for arsenic and nitrate. A local picture only: test your own well to know your water.
Arsenic
17 of 39 sampled wells (44%) had a latest result above the EPA limit of 10 µg/L.
- Median (latest per well)
- 8.4 µg/L
- 90th percentile
- 34 µg/L
- Highest
- 382 µg/L
- Non-detects
- 2 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
- Samples
- 50, 1998-05-19 to 2020-08-06
- Source
- Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18
Nitrate
0 of 41 sampled wells (0%) had a latest result above the EPA limit of 10 mg/L as N.
- Median (latest per well)
- 0 mg/L as N
- 90th percentile
- 0.11 mg/L as N
- Highest
- 3.772 mg/L as N
- Non-detects
- 35 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
- Samples
- 44, 1991-03-26 to 2020-08-06
- Source
- Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18
Includes monitoring, research and private wells reported to the Water Quality Portal. Non-detects count only when the lab's detection limit is at or below the EPA limit. Method: data rules.
What to do next
- Test your own well. County numbers cannot tell you what is in your water. See which tests fit your well.
- Use a lab certified by Ohio. Certified labs in Ohio.
- Compare your results with the EPA limits (arsenic 10 µg/L, nitrate 10 mg/L as N). If a result is above a limit, contact your county or state health department.
- If a result is high: arsenic guide · nitrate guide · bacteria guide · salesperson checklist.
- Test again every year for bacteria and nitrate. Get a yearly reminder.