Kings County, New York

Arsenic: 0 of 73 sampled wells (0%) above the EPA limit of 10 µg/L. Nitrate: 29 of 93 sampled wells (31%) above the EPA limit of 10 mg/L as N. Samples 1967-11-15 to 2013-07-26; updated 2026-10-18. Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well.

What wells in this county have measured for arsenic and nitrate. A local picture only: test your own well to know your water.

Arsenic

0 of 73 sampled wells (0%) had a latest result above the EPA limit of 10 µg/L.

Median (latest per well): 0 µg/L
90th percentile: 1 µg/L
Highest: 10 µg/L
Non-detects: 47 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
Samples: 316, 1970-07-20 to 2013-07-26
Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18

Nitrate

29 of 93 sampled wells (31%) had a latest result above the EPA limit of 10 mg/L as N.

Median (latest per well): 7.025 mg/L as N
90th percentile: 16.49 mg/L as N
Highest: 28.237 mg/L as N
Non-detects: 7 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
Samples: 340, 1967-11-15 to 2013-07-26
Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18

Includes monitoring, research and private wells reported to the Water Quality Portal. Non-detects count only when the lab's detection limit is at or below the EPA limit. Method: data rules.

What to do next

Test your own well. County numbers cannot tell you what is in your water. See which tests fit your well.
Use a lab certified by New York. Certified labs in New York.
Compare your results with the EPA limits (arsenic 10 µg/L, nitrate 10 mg/L as N). If a result is above a limit, contact your county or state health department.
If a result is high: arsenic guide · nitrate guide · bacteria guide · salesperson checklist.
Test again every year for bacteria and nitrate. Get a yearly reminder.