USCanada

privatewelldata / Counties / New York

Herkimer County, New York

Arsenic: 0 of 25 sampled wells (0%) above the EPA limit of 10 µg/L. Nitrate: 0 of 59 sampled wells (0%) above the EPA limit of 10 mg/L as N. Samples 1966-10-25 to 2023-08-14; updated 2026-10-18. Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well.

What wells in this county have measured for arsenic and nitrate. A local picture only: test your own well to know your water.

Arsenic

0 of 25 sampled wells (0%) had a latest result above the EPA limit of 10 µg/L.

Median (latest per well)
0.15 µg/L
90th percentile
0.5 µg/L
Highest
6 µg/L
Non-detects
7 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
Samples
34, 1971-09-16 to 2023-08-14
Source
Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18

Nitrate

0 of 59 sampled wells (0%) had a latest result above the EPA limit of 10 mg/L as N.

Median (latest per well)
0.384 mg/L as N
90th percentile
2.01 mg/L as N
Highest
6 mg/L as N
Non-detects
6 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
Samples
429, 1966-10-25 to 2023-08-14
Source
Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18

Includes monitoring, research and private wells reported to the Water Quality Portal. Non-detects count only when the lab's detection limit is at or below the EPA limit. Method: data rules.

What to do next

  1. Test your own well. County numbers cannot tell you what is in your water. See which tests fit your well.
  2. Use a lab certified by New York. Certified labs in New York.
  3. Compare your results with the EPA limits (arsenic 10 µg/L, nitrate 10 mg/L as N). If a result is above a limit, contact your county or state health department.
  4. If a result is high: arsenic guide · nitrate guide · bacteria guide · salesperson checklist.
  5. Test again every year for bacteria and nitrate. Get a yearly reminder.