privatewelldata / Counties / New Jersey

Cumberland County, New Jersey

Arsenic: 2 of 134 sampled wells (1%) above the EPA limit of 10 µg/L. Nitrate: 33 of 175 sampled wells (19%) above the EPA limit of 10 mg/L as N. Samples 1953-07-07 to 2026-08-24; updated 2026-10-18. Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well.

What wells in this county have measured for arsenic and nitrate. A local picture only: test your own well to know your water.

Arsenic

2 of 134 sampled wells (1%) had a latest result above the EPA limit of 10 µg/L.

Median (latest per well)
0 µg/L
90th percentile
1 µg/L
Highest
24.1 µg/L
Non-detects
86 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
Samples
280, 1974-08-01 to 2024-08-13
Source
Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18

Nitrate

33 of 175 sampled wells (19%) had a latest result above the EPA limit of 10 mg/L as N.

Median (latest per well)
3.3 mg/L as N
90th percentile
15.3 mg/L as N
Highest
36.5 mg/L as N
Non-detects
23 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
Samples
333, 1953-07-07 to 2026-08-24
Source
Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18

Includes monitoring, research and private wells reported to the Water Quality Portal. Non-detects count only when the lab's detection limit is at or below the EPA limit. Method: data rules.

What to do next

  1. Test your own well. County numbers cannot tell you what is in your water. See which tests fit your well.
  2. Use a lab certified by New Jersey. Certified labs in New Jersey.
  3. Compare your results with the EPA limits (arsenic 10 µg/L, nitrate 10 mg/L as N). If a result is above a limit, contact your county or state health department.
  4. If a result is high: arsenic guide · nitrate guide · bacteria guide · salesperson checklist.
  5. Test again every year for bacteria and nitrate. Get a yearly reminder.