privatewelldata / Counties / New Hampshire

Hillsborough County, New Hampshire

Arsenic: 43 of 211 sampled wells (20%) above the EPA limit of 10 µg/L. Nitrate: 0 of 187 sampled wells (0%) above the EPA limit of 10 mg/L as N. Samples 1963-06-11 to 2022-04-25; updated 2026-10-18. Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well.

What wells in this county have measured for arsenic and nitrate. A local picture only: test your own well to know your water.

Arsenic

43 of 211 sampled wells (20%) had a latest result above the EPA limit of 10 µg/L.

Median (latest per well): 1 µg/L
90th percentile: 26 µg/L
Highest: 140 µg/L
Non-detects: 90 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
Samples: 221, 1986-08-14 to 2022-04-25
Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18

Nitrate

0 of 187 sampled wells (0%) had a latest result above the EPA limit of 10 mg/L as N.

Median (latest per well): 0.06 mg/L as N
90th percentile: 2.4 mg/L as N
Highest: 8.3 mg/L as N
Non-detects: 73 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
Samples: 258, 1963-06-11 to 2021-12-13
Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18

Includes monitoring, research and private wells reported to the Water Quality Portal. Non-detects count only when the lab's detection limit is at or below the EPA limit. Method: data rules.

What to do next

Test your own well. County numbers cannot tell you what is in your water. See which tests fit your well.
Use a lab certified by New Hampshire. Certified labs in New Hampshire.
Compare your results with the EPA limits (arsenic 10 µg/L, nitrate 10 mg/L as N). If a result is above a limit, contact your county or state health department.
If a result is high: arsenic guide · nitrate guide · bacteria guide · salesperson checklist.
Test again every year for bacteria and nitrate. Get a yearly reminder.