USCanada

privatewelldata / Counties / North Carolina

Anson County, North Carolina

Nitrate: 4 of 21 sampled wells (19%) above the EPA limit of 10 mg/L as N. Samples 1947-11-14 to 1964-05-20; updated 2026-10-18. Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well.

What wells in this county have measured for arsenic and nitrate. A local picture only: test your own well to know your water.

Nitrate

4 of 21 sampled wells (19%) had a latest result above the EPA limit of 10 mg/L as N.

Median (latest per well)
1.514 mg/L as N
90th percentile
14.006 mg/L as N
Highest
21.234 mg/L as N
Samples
26, 1947-11-14 to 1964-05-20
Source
Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18

Includes monitoring, research and private wells reported to the Water Quality Portal. Non-detects count only when the lab's detection limit is at or below the EPA limit. Method: data rules.

What to do next

  1. Test your own well. County numbers cannot tell you what is in your water. See which tests fit your well.
  2. Use a lab certified by North Carolina. Certified labs in North Carolina.
  3. Compare your results with the EPA limits (arsenic 10 µg/L, nitrate 10 mg/L as N). If a result is above a limit, contact your county or state health department.
  4. If a result is high: arsenic guide · nitrate guide · bacteria guide · salesperson checklist.
  5. Test again every year for bacteria and nitrate. Get a yearly reminder.