privatewelldata / Counties / Michigan
Huron County, Michigan
Arsenic: 35 of 70 sampled wells (50%) above the EPA limit of 10 µg/L. Nitrate: 0 of 46 sampled wells (0%) above the EPA limit of 10 mg/L as N. Samples 1980-08-21 to 2004-08-27; updated 2026-10-18. Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well.
What wells in this county have measured for arsenic and nitrate. A local picture only: test your own well to know your water.
Arsenic
35 of 70 sampled wells (50%) had a latest result above the EPA limit of 10 µg/L.
- Median (latest per well)
- 11.5 µg/L
- 90th percentile
- 120 µg/L
- Highest
- 252 µg/L
- Non-detects
- 9 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
- Samples
- 80, 1980-08-21 to 1998-12-19
- Source
- Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18
Nitrate
0 of 46 sampled wells (0%) had a latest result above the EPA limit of 10 mg/L as N.
- Median (latest per well)
- 0 mg/L as N
- 90th percentile
- 0 mg/L as N
- Highest
- 1.3 mg/L as N
- Non-detects
- 39 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
- Samples
- 49, 1980-08-21 to 2004-08-27
- Source
- Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18
Includes monitoring, research and private wells reported to the Water Quality Portal. Non-detects count only when the lab's detection limit is at or below the EPA limit. Method: data rules.
What to do next
- Test your own well. County numbers cannot tell you what is in your water. See which tests fit your well.
- Use a lab certified by Michigan. Certified labs in Michigan.
- Compare your results with the EPA limits (arsenic 10 µg/L, nitrate 10 mg/L as N). If a result is above a limit, contact your county or state health department.
- If a result is high: arsenic guide · nitrate guide · bacteria guide · salesperson checklist.
- Test again every year for bacteria and nitrate. Get a yearly reminder.