privatewelldata / Counties / Massachusetts

Hampden County, Massachusetts

Arsenic: 1 of 24 sampled wells (4%) above the EPA limit of 10 µg/L. Nitrate: 3 of 69 sampled wells (4%) above the EPA limit of 10 mg/L as N. Samples 1954-12-08 to 2017-08-10; updated 2026-10-18. Source: Water Quality Portal (USGS, EPA, NWQMC), siteType=Well.

What wells in this county have measured for arsenic and nitrate. A local picture only: test your own well to know your water.

Arsenic

1 of 24 sampled wells (4%) had a latest result above the EPA limit of 10 µg/L.

Median (latest per well)
0.275 µg/L
90th percentile
2 µg/L
Highest
12 µg/L
Non-detects
9 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
Samples
42, 1982-08-10 to 2017-08-10
Source
Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18

Nitrate

3 of 69 sampled wells (4%) had a latest result above the EPA limit of 10 mg/L as N.

Median (latest per well)
0.43 mg/L as N
90th percentile
3.5 mg/L as N
Highest
20.2 mg/L as N
Non-detects
15 wells' latest result was "not detected" with no detection limit reported; they are counted as below the limit.
Samples
93, 1954-12-08 to 2017-08-10
Source
Water Quality Portal (USGS, EPA, NWQMC), siteType=Well, downloaded 2026-10-18

Includes monitoring, research and private wells reported to the Water Quality Portal. Non-detects count only when the lab's detection limit is at or below the EPA limit. Method: data rules.

What to do next

  1. Test your own well. County numbers cannot tell you what is in your water. See which tests fit your well.
  2. Use a lab certified by Massachusetts. Certified labs in Massachusetts.
  3. Compare your results with the EPA limits (arsenic 10 µg/L, nitrate 10 mg/L as N). If a result is above a limit, contact your county or state health department.
  4. If a result is high: arsenic guide · nitrate guide · bacteria guide · salesperson checklist.
  5. Test again every year for bacteria and nitrate. Get a yearly reminder.